Search found 15 matches

by Stefan
Wed Jan 13, 2021 7:38 pm
Forum: myCNC Technical support (English)
Topic: M6 with air cilinders
Replies: 28
Views: 1649

Re: M6 with air cilinders

Hi,
The problem is solved. When copy profile obviously not "all" variables are transfered. The issue is appeared when Lift hеight is NOT 0 in Tangent configuration . Somehow this was left 10 from default profile.
by Stefan
Thu Jan 07, 2021 10:55 am
Forum: myCNC Technical support (English)
Topic: M6 with air cilinders
Replies: 28
Views: 1649

Re: M6 with air cilinders

X1366V-original.rar
(212.75 KiB) Downloaded 8 times
X1366V-problem.rar
(215.78 KiB) Downloaded 7 times
attached both profiles
by Stefan
Wed Jan 06, 2021 4:50 pm
Forum: myCNC Technical support (English)
Topic: M6 with air cilinders
Replies: 28
Views: 1649

Re: M6 with air cilinders

Hi, I received my second ET6+SBC this week.Then copied profile from my first ET6 because it works fine. But there are something wrong. When run file with rotated panels and start Knife cutting then Flood(open collector) is activated in addition PEN Relay1 is activated too. But I have no M8(Flood) in...
by Stefan
Fri Oct 02, 2020 2:39 pm
Forum: myCNC Technical support (English)
Topic: Spline motion with G1 or G2
Replies: 2
Views: 139

Re: Spline motion with G1 or G2

I have found it.
CV tolerance, units..... it was 0.001 now is 0.1 and move fine
by Stefan
Mon Sep 28, 2020 4:42 pm
Forum: myCNC Technical support (English)
Topic: M6 with air cilinders
Replies: 28
Views: 1649

Re: M6 with air cilinders

Do you have latest release in preinstalled Ubuntu MATE myCNC package, because myCNC in Tinkerboard is almost configured to do some job. I want to try the new DXF Import with another PC and same controler and machine. May I have some issues if disconnect Tinkerboard from the controler and connect ano...
by Stefan
Mon Sep 28, 2020 4:20 pm
Forum: myCNC Technical support (English)
Topic: Spline motion with G1 or G2
Replies: 2
Views: 139

Spline motion with G1 or G2

Hi, When use DXF import for shapes like circles and arcs ,the code is G2 motion and my plotter/cutter makes smooth & non-stop motion. circle.jpg When Import some shapes with splines, the code is many G1 lines and machine makes many "little stops" for every line. See picture with the result: spline.j...
by Stefan
Tue Sep 01, 2020 2:36 pm
Forum: myCNC Technical support (English)
Topic: M6 with air cilinders
Replies: 28
Views: 1649

Re: M6 with air cilinders

Hello,
any update for DXF feature ?
by Stefan
Fri Aug 28, 2020 12:47 pm
Forum: myCNC Technical support (English)
Topic: Problem during install myCNC
Replies: 1
Views: 151

Problem during install myCNC

Hi all,
yesterday installed new downloaded Ubuntu and follow this link to install and run myCNC https://www.youtube.com/watch?v=s1b7fQy ... e=emb_logo.
Problem is this command:

isi@isi:~$ gnome-desktop-item-edit ~/Desktop/ --create-new
gnome-desktop-item-edit: command not found

Please help
by Stefan
Thu Nov 28, 2019 2:30 pm
Forum: myCNC Technical support (English)
Topic: M6 with air cilinders
Replies: 28
Views: 1649

Re: M6 with air cilinders

Hi, Today updated to ver. 1.88.3676 to try new DXF feature and have some issues (using Thinkerboard): 1- arrow that shows tool position/direction is missing 2- somehow port3 is set when pres Start to run the g-code (old issue - I'm not sure but this happened after request of another user in the foru...
by Stefan
Wed Nov 13, 2019 10:40 am
Forum: myCNC Technical support (English)
Topic: M6 with air cilinders
Replies: 28
Views: 1649

Re: M6 with air cilinders

any update for this DXF import feature ?