ET-6 post processor

RMC
Posts: 24
Joined: Sun Sep 30, 2018 6:28 am

ET-6 post processor

Post by RMC » Mon Oct 01, 2018 5:05 am

Hi there Finally ready to do a dry run top some things out and other then ui issues i have i was wondering what is the post processor i should use for fusion 360 ?
I running it as a 3 axis mill.

mycnc
Posts: 140
Joined: Thu May 10, 2018 2:42 pm

Re: ET-6 post processor

Post by mycnc » Mon Oct 01, 2018 4:06 pm

We tried to make g-codes compatible with Fanuc. However, they have several groups of g-codes for different types of machines.

We don't have any CAM software and not able to test postprocessors ourself. If you can generate a few g-code examples with different postprocessors and put it here, I can tell which one will suit better.

Usually, it's possible to find some compatible postprocessor. Sometimes some minor changes in postprocessor needed.
As far as I know, postprocessors for Haas, Mach3, Fanuc should be good.

RMC
Posts: 24
Joined: Sun Sep 30, 2018 6:28 am

Re: ET-6 post processor

Post by RMC » Tue Oct 02, 2018 4:08 am

heres the first one this is the default fanuc post processor for fusion 360

Code: Select all

%
O1001
(T66 D=0.3125 CR=0. TAPER=118DEG - ZMIN=-0.1089 - DRILL)
N10 G90 G94 G17 G49 G40 G80
N15 G20
N20 G28 G91 Z0.
N25 G90

(DRILL3)
N30 T66 M06
N35 S1500 M03
N40 G57
N45 G00 A0.
N50 M08
N60 G00 X0. Y0.
N65 G43 Z2.3 H66
N75 G00 Z1.9
N80 G98 G83 X0. Y0. Z-0.1089 R1.9 Q0.1 F8.
N85 G80
N90 Z2.3

N100 M09
N105 G28 G91 Z0.
N110 G49
N115 G28 X0. Y0.
N120 M30
%

heres the second one

Code: Select all

%
O1002
(T61 D=0.75 CR=0.03 - ZMIN=1.04 - BULLNOSE END MILL)
N10 G90 G94 G17 G49 G40 G80
N15 G20
N20 G28 G91 Z0.
N25 G90

(2D ADAPTIVE1)
N30 T61 M06
N35 S4200 M03
N40 G57
N45 G00 A0.
N50 M08
N60 G00 X0.0245 Y-0.3269
N65 G43 Z2.3 H61
N70 G00 Z1.875
N75 G01 Z1.8 F25.
N80 G02 X-0.0244 Y0.3268 Z1.7685 I-0.0244 J0.3268
N85 X0.0245 Y-0.3269 Z1.7371 I0.0244 J-0.3268
N90 X-0.0244 Y0.3268 Z1.7056 I-0.0244 J0.3268
N95 X0.0245 Y-0.3269 Z1.6742 I0.0244 J-0.3268
N100 X-0.0244 Y0.3268 Z1.6427 I-0.0244 J0.3268
N105 X0.0245 Y-0.3269 Z1.6112 I0.0244 J-0.3268
N110 X-0.0244 Y0.3268 Z1.5798 I-0.0244 J0.3268
N115 X0.0245 Y-0.3269 Z1.5483 I0.0244 J-0.3268
N120 X-0.0244 Y0.3268 Z1.5169 I-0.0244 J0.3268
N125 X0.3278 Y0. Z1.5004 I0.0244 J-0.3268
N130 X-0.3277 I-0.3278
N135 X0.3278 Y0.0041 I0.3278
N140 G01 Y0.
N145 X0.3279 Y-0.016 F40.
N150 X0.3325 Y-0.08
N155 G02 X0.3313 Y-0.1768 I-0.165 J-0.0465
N160 X0.2409 Y-0.3188 I-0.2754 J0.0757
N165 X-0.0086 Y-0.4111 I-0.2438 J0.2757
N170 X-0.4014 Y-0.104 I0.0019 J0.4072
N175 X0.3759 Y0.1761 I0.4014 J0.1045
N180 X0.4294 Y0.0207 I-0.603 J-0.2949
N185 X0.4152 Y-0.212 I-0.4317 J-0.0903
N190 X0.1526 Y-0.4739 I-0.4099 J0.1484
N195 X-0.2778 Y-0.4257 I-0.1672 J0.4524
N200 X-0.4243 Y0.2841 I0.2734 J0.4265
N205 X0.3755 Y0.3467 I0.4245 J-0.2833
N210 X0.5389 Y-0.0222 I-0.4464 J-0.4184
N215 X0.4615 Y-0.3408 I-0.5417 J-0.0371
N220 X0.0405 Y-0.601 I-0.4708 J0.2909
N225 X-0.4722 Y-0.3887 I-0.0569 J0.5878
N230 X-0.335 Y0.514 I0.4689 J0.3905
N235 X0.3699 Y0.4902 I0.3355 J-0.5128
N240 X0.6466 Y-0.0511 I-0.4094 J-0.5507
N245 X0.1696 Y-0.684 I-0.6535 J-0.0037
N250 X-0.3807 Y-0.6084 I-0.1898 J0.6598
N255 X-0.6847 Y0.2295 I0.3723 J0.6092
N260 X0.3208 Y0.6478 I0.6848 J-0.2284
N265 X0.6681 Y0.3082 I-0.3421 J-0.6972
N270 X0.7382 Y-0.2272 I-0.6868 J-0.3622
N275 X0.2436 Y-0.7774 I-0.7484 J0.1754
N280 G01 X0.2293 Y-0.7816
N285 X0.2146 Y-0.7841
N290 X0.1998 Y-0.785
N295 X-0.1236
N300 G02 X-0.4157 Y-0.7091 I0.0111 J0.6423
N305 X-0.6917 Y-0.4622 I0.3552 J0.675
N310 X-0.7811 Y-0.2903 I0.6028 J0.4226
N315 G01 X-0.7839 Y-0.2738
N320 X-0.785 Y-0.2573
N325 Y0.1461
N330 G02 X-0.7243 Y0.3922 I0.6015 J-0.0177
N335 X-0.5223 Y0.6493 I0.6725 J-0.3207
N340 X-0.3092 Y0.7761 I0.5087 J-0.6124
N345 G01 X-0.2937 Y0.781
N350 X-0.2778 Y0.784
N355 X-0.2617 Y0.785
N360 X0.1461
N365 G02 X0.3971 Y0.7235 I-0.0173 J-0.6136
N370 X0.6149 Y0.5701 I-0.3297 J-0.6993
N375 X0.7707 Y0.3598 I-0.598 J-0.6061
N380 X0.785 Y0.3004 I-0.1173 J-0.0596
N385 G01 Y-0.2809
N390 G02 X0.7322 Y-0.4909 I-0.5122 J0.0171
N395 X0.5914 Y-0.6892 I-0.6344 J0.3013
N400 G01 X0.5635 Y-0.7161
N405 X0.5337 Y-0.742
N410 X0.5144 Y-0.7572
N415 G02 X0.4341 Y-0.785 I-0.0803 J0.1021
N420 G01 X0.1998
N425 G02 X0.1713 Y-0.7783 I0.0026 J0.075 F25.
N430 X0.1542 Y-0.6526 I0.0311 J0.0682 F100.
N435 G01 X0.6618 Y-0.2261
N440 G02 X0.7783 Y-0.2524 I0.0482 J-0.0574
N445 X0.785 Y-0.2809 I-0.0682 J-0.0311 F25.
N450 G01 Y-0.4731 F40.
N455 G02 X0.7428 Y-0.632 I-0.3851 J0.0171
N460 X0.6738 Y-0.7405 I-0.4556 J0.214
N465 X0.5758 Y-0.785 I-0.0981 J0.0857
N470 G01 X0.4341
N475 G02 X0.4056 Y-0.7783 I0.0026 J0.075 F25.
N480 X0.3879 Y-0.6531 I0.0311 J0.0682 F100.
N485 G01 X0.6612 Y-0.4187
N490 G02 X0.7783 Y-0.4446 I0.0488 J-0.0569
N495 X0.785 Y-0.4731 I-0.0682 J-0.0311 F25.
N500 G01 Y-0.618 F40.
N505 G02 X0.7705 Y-0.703 I-0.2637 J0.0013
N510 X0.663 Y-0.7846 I-0.1186 J0.0447
N515 G01 X0.6571 Y-0.7842 F25.
N520 X0.6512 Y-0.7835
N525 X0.6455 Y-0.7822
N530 X0.6398 Y-0.7805
N535 X0.6343 Y-0.7784
N540 G02 X0.5974 Y-0.675 I0.0297 J0.0689 F100.
N545 G01 X0.6434 Y-0.5862
N550 G02 X0.7783 Y-0.5895 I0.0666 J-0.0345
N555 X0.785 Y-0.618 I-0.0682 J-0.0311 F25.
N560 X0.7811 Y-0.6967 I-0.4718 J-0.0161 F40.
N565 X0.6855 Y-0.7827 I-0.1065 J0.0223
N570 G01 X0.663 Y-0.7845
N575 X0.6405 Y-0.785
N580 X0.5758
N585 G02 X0.5473 Y-0.7783 I0.0026 J0.075 F25.
N590 X0.5066 Y-0.7318 I0.0311 J0.0682 F100.
N595 G01 X0.0769 Y0.6883
N600 G02 X0.1176 Y0.7783 I0.0718 J0.0217
N605 X0.1461 Y0.785 I0.0311 J-0.0682 F25.
N610 G01 X0.3607 F40.
N615 G02 X0.5355 Y0.7417 I-0.0119 J-0.4227
N620 X0.6963 Y0.6344 I-0.2732 J-0.5834
N625 G01 X0.7241 Y0.6085
N630 X0.7488 Y0.5831
N635 G02 X0.7837 Y0.5116 I-0.0956 J-0.0909
N640 G01 X0.785 Y0.4929
N645 Y0.3004
N650 G02 X0.7783 Y0.2719 I-0.075 J0.0026 F25.
N655 X0.653 Y0.2544 I-0.0682 J0.0311 F100.
N660 G01 X0.3062 Y0.6614
N665 G02 X0.3322 Y0.7783 I0.0571 J0.0486
N670 X0.3607 Y0.785 I0.0311 J-0.0682 F25.
N675 G01 X0.5281 F40.
N680 G02 X0.6756 Y0.7474 I-0.0128 J-0.358
N685 X0.7436 Y0.7054 I-0.1141 J-0.2612
N690 X0.785 Y0.6102 I-0.0897 J-0.0956
N695 G01 X0.7846 Y0.6043 F25.
N700 X0.7837 Y0.5985
N705 X0.7823 Y0.5928
N710 X0.7805 Y0.5872
N715 X0.7783 Y0.5817
N720 G02 X0.6743 Y0.5469 I-0.0682 J0.0311 F100.
N725 G01 X0.495 Y0.6441
N730 G02 X0.4996 Y0.7783 I0.0358 J0.0659
N735 X0.5281 Y0.785 I0.0311 J-0.0682 F25.
N740 G01 X0.6405 F40.
N745 G02 X0.708 Y0.7783 I0.0088 J-0.2531
N750 X0.7613 Y0.7402 I-0.0357 J-0.1065
N755 X0.7826 Y0.6854 I-0.0863 J-0.0651
N760 G01 X0.7845 Y0.663
N765 X0.785 Y0.6405
N770 Y0.4929
N775 G02 X0.7783 Y0.4644 I-0.075 J0.0026 F25.
N780 X0.7717 Y0.4528 I-0.0682 J0.0311 F100.
N785 G01 X-0.0646 Y-0.7528
N790 G02 X-0.0951 Y-0.7783 I-0.0616 J0.0427
N795 X-0.1236 Y-0.785 I-0.0311 J0.0682 F25.
N800 G01 X-0.3483 F40.
N805 G02 X-0.5206 Y-0.7434 I0.0095 J0.4163
N810 X-0.6989 Y-0.6185 I0.2669 J0.5708
N815 G01 X-0.7249 Y-0.5921
N820 X-0.7501 Y-0.5637
N825 G02 X-0.7803 Y-0.5093 I0.1042 J0.0934
N830 G01 X-0.7838 Y-0.4921
N835 X-0.785 Y-0.4745
N840 Y-0.2573
N845 G02 X-0.7783 Y-0.2288 I0.075 J-0.0026 F25.
N850 X-0.6514 Y-0.2131 I0.0682 J-0.0311 F100.
N855 G01 X-0.2923 Y-0.6633
N860 G02 X-0.3199 Y-0.7783 I-0.0586 J-0.0468
N865 X-0.3483 Y-0.785 I-0.0311 J0.0682 F25.
N870 G01 X-0.518 F40.
N875 G02 X-0.6621 Y-0.747 I0.015 J0.3488
N880 X-0.7354 Y-0.7031 I0.168 J0.3635
N885 X-0.785 Y-0.6009 I0.0804 J0.1022
N890 X-0.7783 Y-0.5724 I0.075 J-0.0026 F25.
N895 X-0.6733 Y-0.5382 I0.0682 J-0.0311 F100.
N900 G01 X-0.4839 Y-0.6447
N905 G02 X-0.4895 Y-0.7783 I-0.0368 J-0.0654
N910 X-0.518 Y-0.785 I-0.0311 J0.0682 F25.
N915 G01 X-0.6405 F40.
N920 G02 X-0.7064 Y-0.7761 I-0.0076 J0.192
N925 X-0.7753 Y-0.7155 I0.0411 J0.1163
N930 X-0.7786 Y-0.6864 I0.0714 J0.0228 F25.
N935 X-0.6747 Y-0.6236 I0.0747 J-0.0063 F100.
N940 G01 X-0.6348 Y-0.6405
N945 G02 X-0.6343 Y-0.7784 I-0.0292 J-0.0691
N950 X-0.663 Y-0.7845 I-0.0297 J0.0689 F25.
N955 G01 X-0.6854 Y-0.7826 F40.
N960 G02 X-0.7826 Y-0.6854 I0.0104 J0.1076
N965 G01 X-0.7845 Y-0.663
N970 X-0.785 Y-0.6405
N975 Y-0.4745
N980 X-0.7846 Y-0.4737 F25.
N985 G03 X-0.7644 Y-0.4536 I-0.2886 J0.3095
N990 X-0.7144 Y-0.3885 I-0.3088 J0.2893 F100.
N995 X-0.703 Y-0.3488 I-0.0636 J0.0397
N1000 G01 Y0.0203
N1005 G03 X-0.7144 Y0.06 I-0.075
N1010 X-0.7644 Y0.1251 I-0.3589 J-0.2243
N1015 X-0.7846 Y0.1453 I-0.3088 J-0.2893 F25.
N1020 G01 X-0.785 Y0.1461
N1025 Y0.3607 F40.
N1030 G02 X-0.7416 Y0.5288 I0.4077 J-0.0155
N1035 X-0.6145 Y0.706 I0.5669 J-0.2726
N1040 G01 X-0.5878 Y0.7318
N1045 X-0.5589 Y0.7568
N1050 G02 X-0.4781 Y0.785 I0.0808 J-0.1018
N1055 G01 X-0.2617
N1060 G02 X-0.2332 Y0.7783 I-0.0026 J-0.075 F25.
N1065 X-0.2182 Y0.6508 I-0.0311 J-0.0682 F100.
N1070 G01 X-0.664 Y0.3041
N1075 G02 X-0.7783 Y0.3322 I-0.046 J0.0592
N1080 X-0.785 Y0.3607 I0.0682 J0.0311 F25.
N1085 G01 Y0.518 F40.
N1090 G02 X-0.749 Y0.6608 I0.3445 J-0.0109
N1095 X-0.7056 Y0.7346 I0.3641 J-0.1648
N1100 X-0.6028 Y0.785 I0.1029 J-0.0797
N1105 X-0.5743 Y0.7783 I-0.0026 J-0.075 F25.
N1110 X-0.5398 Y0.6738 I-0.0311 J-0.0682 F100.
N1115 G01 X-0.6444 Y0.4844
N1120 G02 X-0.7783 Y0.4895 I-0.0656 J0.0363
N1125 X-0.785 Y0.518 I0.0682 J0.0311 F25.
N1130 G01 Y0.6405 F40.
N1135 G02 X-0.771 Y0.7243 I0.2216 J0.0061
N1140 G01 X-0.7681 Y0.7298
N1145 G02 X-0.7443 Y0.7449 I0.0257 J-0.0142 F25.
N1150 X-0.7138 Y0.7087 I0.0019 J-0.0293 F100.
N1155 G01 X-0.7266 Y0.6564
N1160 G02 X-0.7706 Y0.6384 I-0.0285 J0.007
N1165 X-0.7845 Y0.663 I0.0155 J0.025 F25.
N1170 G01 X-0.7826 Y0.6854 F40.
N1175 G02 X-0.6854 Y0.7826 I0.1076 J-0.0104
N1180 G01 X-0.663 Y0.7845
N1185 X-0.6405 Y0.785
N1190 X-0.4781
N1195 X-0.4741 Y0.7845 Z1.5007 F25.
N1200 X-0.4702 Y0.7839 Z1.5015
N1205 X-0.4664 Y0.7834 Z1.5029
N1210 X-0.4629 Y0.7829 Z1.5047
N1215 X-0.4596 Y0.7818 Z1.5072
N1220 X-0.4567 Y0.7807 Z1.5102
N1225 X-0.4542 Y0.7799 Z1.5136
N1230 X-0.4522 Y0.7792 Z1.5173
N1235 X-0.4507 Y0.7787 Z1.5214
N1240 X-0.4499 Y0.7784 Z1.5256
N1245 X-0.4496 Y0.7783 Z1.5298
N1250 G00 Z1.9
N1255 X0.0245 Y-0.3269
N1260 Z1.6754
N1265 G01 Z1.6004 F25.
N1270 G02 X-0.0244 Y0.3268 Z1.5689 I-0.0244 J0.3268
N1275 X0.0245 Y-0.3269 Z1.5375 I0.0244 J-0.3268
N1280 X-0.0244 Y0.3268 Z1.506 I-0.0244 J0.3268
N1285 X0.0245 Y-0.3269 Z1.4746 I0.0244 J-0.3268
N1290 X-0.0244 Y0.3268 Z1.4431 I-0.0244 J0.3268
N1295 X0.0245 Y-0.3269 Z1.4116 I0.0244 J-0.3268
N1300 X-0.0244 Y0.3268 Z1.3802 I-0.0244 J0.3268
N1305 X0.0245 Y-0.3269 Z1.3487 I0.0244 J-0.3268
N1310 X-0.0244 Y0.3268 Z1.3173 I-0.0244 J0.3268
N1315 X0.3278 Y0. Z1.3008 I0.0244 J-0.3268
N1320 X-0.3277 I-0.3278
N1325 X0.3278 Y0.0041 I0.3278
N1330 G01 Y0.
N1335 X0.3279 Y-0.016 F40.
N1340 X0.3325 Y-0.08
N1345 G02 X0.3313 Y-0.1768 I-0.165 J-0.0465
N1350 X0.2409 Y-0.3188 I-0.2754 J0.0757
N1355 X-0.0086 Y-0.4111 I-0.2438 J0.2757
N1360 X-0.4014 Y-0.104 I0.0019 J0.4072
N1365 X0.3759 Y0.1761 I0.4014 J0.1045
N1370 X0.4294 Y0.0207 I-0.603 J-0.2949
N1375 X0.4152 Y-0.212 I-0.4317 J-0.0903
N1380 X0.1526 Y-0.4739 I-0.4099 J0.1484
N1385 X-0.2778 Y-0.4257 I-0.1672 J0.4524
N1390 X-0.4243 Y0.2841 I0.2734 J0.4265
N1395 X0.3755 Y0.3467 I0.4245 J-0.2833
N1400 X0.5389 Y-0.0222 I-0.4464 J-0.4184
N1405 X0.4615 Y-0.3408 I-0.5417 J-0.0371
N1410 X0.0405 Y-0.601 I-0.4708 J0.2909
N1415 X-0.4722 Y-0.3887 I-0.0569 J0.5878
N1420 X-0.335 Y0.514 I0.4689 J0.3905
N1425 X0.3699 Y0.4902 I0.3355 J-0.5128
N1430 X0.6466 Y-0.0511 I-0.4094 J-0.5507
N1435 X0.1696 Y-0.684 I-0.6535 J-0.0037
N1440 X-0.3807 Y-0.6084 I-0.1898 J0.6598
N1445 X-0.6847 Y0.2295 I0.3723 J0.6092
N1450 X0.3208 Y0.6478 I0.6848 J-0.2284
N1455 X0.6681 Y0.3082 I-0.3421 J-0.6972
N1460 X0.7382 Y-0.2272 I-0.6868 J-0.3622
N1465 X0.2436 Y-0.7774 I-0.7484 J0.1754
N1470 G01 X0.2293 Y-0.7816
N1475 X0.2146 Y-0.7841
N1480 X0.1998 Y-0.785
N1485 X-0.1236
N1490 G02 X-0.4157 Y-0.7091 I0.0111 J0.6423
N1495 X-0.6917 Y-0.4622 I0.3552 J0.675
N1500 X-0.7811 Y-0.2903 I0.6028 J0.4226
N1505 G01 X-0.7839 Y-0.2738
N1510 X-0.785 Y-0.2573
N1515 Y0.1461
N1520 G02 X-0.7243 Y0.3922 I0.6015 J-0.0177
N1525 X-0.5223 Y0.6493 I0.6725 J-0.3207
N1530 X-0.3092 Y0.7761 I0.5087 J-0.6124
N1535 G01 X-0.2937 Y0.781
N1540 X-0.2778 Y0.784
N1545 X-0.2617 Y0.785
N1550 X0.1461
N1555 G02 X0.3971 Y0.7235 I-0.0173 J-0.6136
N1560 X0.6149 Y0.5701 I-0.3297 J-0.6993
N1565 X0.7707 Y0.3598 I-0.598 J-0.6061
N1570 X0.785 Y0.3004 I-0.1173 J-0.0596
N1575 G01 Y-0.2809
N1580 G02 X0.7322 Y-0.4909 I-0.5122 J0.0171
N1585 X0.5914 Y-0.6892 I-0.6344 J0.3013
N1590 G01 X0.5635 Y-0.7161
N1595 X0.5337 Y-0.742
N1600 X0.5144 Y-0.7572
N1605 G02 X0.4341 Y-0.785 I-0.0803 J0.1021
N1610 G01 X0.1998
N1615 G02 X0.1713 Y-0.7783 I0.0026 J0.075 F25.
N1620 X0.1542 Y-0.6526 I0.0311 J0.0682 F100.
N1625 G01 X0.6618 Y-0.2261
N1630 G02 X0.7783 Y-0.2524 I0.0482 J-0.0574
N1635 X0.785 Y-0.2809 I-0.0682 J-0.0311 F25.
N1640 G01 Y-0.4731 F40.
N1645 G02 X0.7428 Y-0.632 I-0.3851 J0.0171
N1650 X0.6738 Y-0.7405 I-0.4556 J0.214
N1655 X0.5758 Y-0.785 I-0.0981 J0.0857
N1660 G01 X0.4341
N1665 G02 X0.4056 Y-0.7783 I0.0026 J0.075 F25.
N1670 X0.3879 Y-0.6531 I0.0311 J0.0682 F100.
N1675 G01 X0.6612 Y-0.4187
N1680 G02 X0.7783 Y-0.4446 I0.0488 J-0.0569
N1685 X0.785 Y-0.4731 I-0.0682 J-0.0311 F25.
N1690 G01 Y-0.618 F40.
N1695 G02 X0.7705 Y-0.703 I-0.2637 J0.0013
N1700 X0.663 Y-0.7846 I-0.1186 J0.0447
N1705 G01 X0.6571 Y-0.7842 F25.
N1710 X0.6512 Y-0.7835
N1715 X0.6455 Y-0.7822
N1720 X0.6398 Y-0.7805
N1725 X0.6343 Y-0.7784
N1730 G02 X0.5974 Y-0.675 I0.0297 J0.0689 F100.
N1735 G01 X0.6434 Y-0.5862
N1740 G02 X0.7783 Y-0.5895 I0.0666 J-0.0345
N1745 X0.785 Y-0.618 I-0.0682 J-0.0311 F25.
N1750 X0.7811 Y-0.6967 I-0.4718 J-0.0161 F40.
N1755 X0.6855 Y-0.7827 I-0.1065 J0.0223
N1760 G01 X0.663 Y-0.7845
N1765 X0.6405 Y-0.785
N1770 X0.5758
N1775 G02 X0.5473 Y-0.7783 I0.0026 J0.075 F25.
N1780 X0.5066 Y-0.7318 I0.0311 J0.0682 F100.
N1785 G01 X0.0769 Y0.6883
N1790 G02 X0.1176 Y0.7783 I0.0718 J0.0217
N1795 X0.1461 Y0.785 I0.0311 J-0.0682 F25.
N1800 G01 X0.3607 F40.
N1805 G02 X0.5355 Y0.7417 I-0.0119 J-0.4227
N1810 X0.6963 Y0.6344 I-0.2732 J-0.5834
N1815 G01 X0.7241 Y0.6085
N1820 X0.7488 Y0.5831
N1825 G02 X0.7837 Y0.5116 I-0.0956 J-0.0909
N1830 G01 X0.785 Y0.4929
N1835 Y0.3004
N1840 G02 X0.7783 Y0.2719 I-0.075 J0.0026 F25.
N1845 X0.653 Y0.2544 I-0.0682 J0.0311 F100.
N1850 G01 X0.3062 Y0.6614
N1855 G02 X0.3322 Y0.7783 I0.0571 J0.0486
N1860 X0.3607 Y0.785 I0.0311 J-0.0682 F25.
N1865 G01 X0.5281 F40.
N1870 G02 X0.6756 Y0.7474 I-0.0128 J-0.358
N1875 X0.7436 Y0.7054 I-0.1141 J-0.2612
N1880 X0.785 Y0.6102 I-0.0897 J-0.0956
N1885 G01 X0.7846 Y0.6043 F25.
N1890 X0.7837 Y0.5985
N1895 X0.7823 Y0.5928
N1900 X0.7805 Y0.5872
N1905 X0.7783 Y0.5817
N1910 G02 X0.6743 Y0.5469 I-0.0682 J0.0311 F100.
N1915 G01 X0.495 Y0.6441
N1920 G02 X0.4996 Y0.7783 I0.0358 J0.0659
N1925 X0.5281 Y0.785 I0.0311 J-0.0682 F25.
N1930 G01 X0.6405 F40.
N1935 G02 X0.708 Y0.7783 I0.0088 J-0.2531
N1940 X0.7613 Y0.7402 I-0.0357 J-0.1065
N1945 X0.7826 Y0.6854 I-0.0863 J-0.0651
N1950 G01 X0.7845 Y0.663
N1955 X0.785 Y0.6405
N1960 Y0.4929
N1965 G02 X0.7783 Y0.4644 I-0.075 J0.0026 F25.
N1970 X0.7717 Y0.4528 I-0.0682 J0.0311 F100.
N1975 G01 X-0.0646 Y-0.7528
N1980 G02 X-0.0951 Y-0.7783 I-0.0616 J0.0427
N1985 X-0.1236 Y-0.785 I-0.0311 J0.0682 F25.
N1990 G01 X-0.3483 F40.
N1995 G02 X-0.5206 Y-0.7434 I0.0095 J0.4163
N2000 X-0.6989 Y-0.6185 I0.2669 J0.5708
N2005 G01 X-0.7249 Y-0.5921
N2010 X-0.7501 Y-0.5637
N2015 G02 X-0.7803 Y-0.5093 I0.1042 J0.0934
N2020 G01 X-0.7838 Y-0.4921
N2025 X-0.785 Y-0.4745
N2030 Y-0.2573
N2035 G02 X-0.7783 Y-0.2288 I0.075 J-0.0026 F25.
N2040 X-0.6514 Y-0.2131 I0.0682 J-0.0311 F100.
N2045 G01 X-0.2923 Y-0.6633
N2050 G02 X-0.3199 Y-0.7783 I-0.0586 J-0.0468
N2055 X-0.3483 Y-0.785 I-0.0311 J0.0682 F25.
N2060 G01 X-0.518 F40.
N2065 G02 X-0.6621 Y-0.747 I0.015 J0.3488
N2070 X-0.7354 Y-0.7031 I0.168 J0.3635
N2075 X-0.785 Y-0.6009 I0.0804 J0.1022
N2080 X-0.7783 Y-0.5724 I0.075 J-0.0026 F25.
N2085 X-0.6733 Y-0.5382 I0.0682 J-0.0311 F100.
N2090 G01 X-0.4839 Y-0.6447
N2095 G02 X-0.4895 Y-0.7783 I-0.0368 J-0.0654
N2100 X-0.518 Y-0.785 I-0.0311 J0.0682 F25.
N2105 G01 X-0.6405 F40.
N2110 G02 X-0.7064 Y-0.7761 I-0.0076 J0.192
N2115 X-0.7753 Y-0.7155 I0.0411 J0.1163
N2120 X-0.7786 Y-0.6864 I0.0714 J0.0228 F25.
N2125 X-0.6747 Y-0.6236 I0.0747 J-0.0063 F100.
N2130 G01 X-0.6348 Y-0.6405
N2135 G02 X-0.6343 Y-0.7784 I-0.0292 J-0.0691
N2140 X-0.663 Y-0.7845 I-0.0297 J0.0689 F25.
N2145 G01 X-0.6854 Y-0.7826 F40.
N2150 G02 X-0.7826 Y-0.6854 I0.0104 J0.1076
N2155 G01 X-0.7845 Y-0.663
N2160 X-0.785 Y-0.6405
N2165 Y-0.4745
N2170 X-0.7846 Y-0.4737 F25.
N2175 G03 X-0.7644 Y-0.4536 I-0.2886 J0.3095
N2180 X-0.7144 Y-0.3885 I-0.3088 J0.2893 F100.
N2185 X-0.703 Y-0.3488 I-0.0636 J0.0397
N2190 G01 Y0.0203
N2195 G03 X-0.7144 Y0.06 I-0.075
N2200 X-0.7644 Y0.1251 I-0.3589 J-0.2243
N2205 X-0.7846 Y0.1453 I-0.3088 J-0.2893 F25.
N2210 G01 X-0.785 Y0.1461
N2215 Y0.3607 F40.
N2220 G02 X-0.7416 Y0.5288 I0.4077 J-0.0155
N2225 X-0.6145 Y0.706 I0.5669 J-0.2726
N2230 G01 X-0.5878 Y0.7318
N2235 X-0.5589 Y0.7568
N2240 G02 X-0.4781 Y0.785 I0.0808 J-0.1018
N2245 G01 X-0.2617
N2250 G02 X-0.2332 Y0.7783 I-0.0026 J-0.075 F25.
N2255 X-0.2182 Y0.6508 I-0.0311 J-0.0682 F100.
N2260 G01 X-0.664 Y0.3041
N2265 G02 X-0.7783 Y0.3322 I-0.046 J0.0592
N2270 X-0.785 Y0.3607 I0.0682 J0.0311 F25.
N2275 G01 Y0.518 F40.
N2280 G02 X-0.749 Y0.6608 I0.3445 J-0.0109
N2285 X-0.7056 Y0.7346 I0.3641 J-0.1648
N2290 X-0.6028 Y0.785 I0.1029 J-0.0797
N2295 X-0.5743 Y0.7783 I-0.0026 J-0.075 F25.
N2300 X-0.5398 Y0.6738 I-0.0311 J-0.0682 F100.
N2305 G01 X-0.6444 Y0.4844
N2310 G02 X-0.7783 Y0.4895 I-0.0656 J0.0363
N2315 X-0.785 Y0.518 I0.0682 J0.0311 F25.
N2320 G01 Y0.6405 F40.
N2325 G02 X-0.771 Y0.7243 I0.2216 J0.0061
N2330 G01 X-0.7681 Y0.7298
N2335 G02 X-0.7443 Y0.7449 I0.0257 J-0.0142 F25.
N2340 X-0.7138 Y0.7087 I0.0019 J-0.0293 F100.
N2345 G01 X-0.7266 Y0.6564
N2350 G02 X-0.7706 Y0.6384 I-0.0285 J0.007
N2355 X-0.7845 Y0.663 I0.0155 J0.025 F25.
N2360 G01 X-0.7826 Y0.6854 F40.
N2365 G02 X-0.6854 Y0.7826 I0.1076 J-0.0104
N2370 G01 X-0.663 Y0.7845
N2375 X-0.6405 Y0.785
N2380 X-0.4781
N2385 X-0.4741 Y0.7845 Z1.3011 F25.
N2390 X-0.4702 Y0.7839 Z1.3019
N2395 X-0.4664 Y0.7834 Z1.3032
N2400 X-0.4629 Y0.7829 Z1.3051
N2405 X-0.4596 Y0.7818 Z1.3076
N2410 X-0.4567 Y0.7807 Z1.3106
N2415 X-0.4542 Y0.7799 Z1.314
N2420 X-0.4522 Y0.7792 Z1.3177
N2425 X-0.4507 Y0.7787 Z1.3218
N2430 X-0.4499 Y0.7784 Z1.3259
N2435 X-0.4496 Y0.7783 Z1.3302
N2440 G00 Z1.9
N2445 X0.0245 Y-0.3269
N2450 Z1.4758
N2455 G01 Z1.4008 F25.
N2460 G02 X-0.0244 Y0.3268 Z1.3693 I-0.0244 J0.3268
N2465 X0.0245 Y-0.3269 Z1.3379 I0.0244 J-0.3268
N2470 X-0.0244 Y0.3268 Z1.3064 I-0.0244 J0.3268
N2475 X0.0245 Y-0.3269 Z1.275 I0.0244 J-0.3268
N2480 X-0.0244 Y0.3268 Z1.2435 I-0.0244 J0.3268
N2485 X0.0245 Y-0.3269 Z1.212 I0.0244 J-0.3268
N2490 X-0.0244 Y0.3268 Z1.1806 I-0.0244 J0.3268
N2495 X0.0245 Y-0.3269 Z1.1491 I0.0244 J-0.3268
N2500 X-0.0244 Y0.3268 Z1.1177 I-0.0244 J0.3268
N2505 X0.3278 Y0. Z1.1012 I0.0244 J-0.3268
N2510 X-0.3277 I-0.3278
N2515 X0.3278 Y0.0041 I0.3278
N2520 G01 Y0.
N2525 X0.3279 Y-0.016 F40.
N2530 X0.3325 Y-0.08
N2535 G02 X0.3313 Y-0.1768 I-0.165 J-0.0465
N2540 X0.2409 Y-0.3188 I-0.2754 J0.0757
N2545 X-0.0086 Y-0.4111 I-0.2438 J0.2757
N2550 X-0.4014 Y-0.104 I0.0019 J0.4072
N2555 X0.3759 Y0.1761 I0.4014 J0.1045
N2560 X0.4294 Y0.0207 I-0.603 J-0.2949
N2565 X0.4152 Y-0.212 I-0.4317 J-0.0903
N2570 X0.1526 Y-0.4739 I-0.4099 J0.1484
N2575 X-0.2778 Y-0.4257 I-0.1672 J0.4524
N2580 X-0.4243 Y0.2841 I0.2734 J0.4265
N2585 X0.3755 Y0.3467 I0.4245 J-0.2833
N2590 X0.5389 Y-0.0222 I-0.4464 J-0.4184
N2595 X0.4615 Y-0.3408 I-0.5417 J-0.0371
N2600 X0.0405 Y-0.601 I-0.4708 J0.2909
N2605 X-0.4722 Y-0.3887 I-0.0569 J0.5878
N2610 X-0.335 Y0.514 I0.4689 J0.3905
N2615 X0.3699 Y0.4902 I0.3355 J-0.5128
N2620 X0.6466 Y-0.0511 I-0.4094 J-0.5507
N2625 X0.1696 Y-0.684 I-0.6535 J-0.0037
N2630 X-0.3807 Y-0.6084 I-0.1898 J0.6598
N2635 X-0.6847 Y0.2295 I0.3723 J0.6092
N2640 X0.3208 Y0.6478 I0.6848 J-0.2284
N2645 X0.6681 Y0.3082 I-0.3421 J-0.6972
N2650 X0.7382 Y-0.2272 I-0.6868 J-0.3622
N2655 X0.2436 Y-0.7774 I-0.7484 J0.1754
N2660 G01 X0.2293 Y-0.7816
N2665 X0.2146 Y-0.7841
N2670 X0.1998 Y-0.785
N2675 X-0.1236
N2680 G02 X-0.4157 Y-0.7091 I0.0111 J0.6423
N2685 X-0.6917 Y-0.4622 I0.3552 J0.675
N2690 X-0.7811 Y-0.2903 I0.6028 J0.4226
N2695 G01 X-0.7839 Y-0.2738
N2700 X-0.785 Y-0.2573
N2705 Y0.1461
N2710 G02 X-0.7243 Y0.3922 I0.6015 J-0.0177
N2715 X-0.5223 Y0.6493 I0.6725 J-0.3207
N2720 X-0.3092 Y0.7761 I0.5087 J-0.6124
N2725 G01 X-0.2937 Y0.781
N2730 X-0.2778 Y0.784
N2735 X-0.2617 Y0.785
N2740 X0.1461
N2745 G02 X0.3971 Y0.7235 I-0.0173 J-0.6136
N2750 X0.6149 Y0.5701 I-0.3297 J-0.6993
N2755 X0.7707 Y0.3598 I-0.598 J-0.6061
N2760 X0.785 Y0.3004 I-0.1173 J-0.0596
N2765 G01 Y-0.2809
N2770 G02 X0.7322 Y-0.4909 I-0.5122 J0.0171
N2775 X0.5914 Y-0.6892 I-0.6344 J0.3013
N2780 G01 X0.5635 Y-0.7161
N2785 X0.5337 Y-0.742
N2790 X0.5144 Y-0.7572
N2795 G02 X0.4341 Y-0.785 I-0.0803 J0.1021
N2800 G01 X0.1998
N2805 G02 X0.1713 Y-0.7783 I0.0026 J0.075 F25.
N2810 X0.1542 Y-0.6526 I0.0311 J0.0682 F100.
N2815 G01 X0.6618 Y-0.2261
N2820 G02 X0.7783 Y-0.2524 I0.0482 J-0.0574
N2825 X0.785 Y-0.2809 I-0.0682 J-0.0311 F25.
N2830 G01 Y-0.4731 F40.
N2835 G02 X0.7428 Y-0.632 I-0.3851 J0.0171
N2840 X0.6738 Y-0.7405 I-0.4556 J0.214
N2845 X0.5758 Y-0.785 I-0.0981 J0.0857
N2850 G01 X0.4341
N2855 G02 X0.4056 Y-0.7783 I0.0026 J0.075 F25.
N2860 X0.3879 Y-0.6531 I0.0311 J0.0682 F100.
N2865 G01 X0.6612 Y-0.4187
N2870 G02 X0.7783 Y-0.4446 I0.0488 J-0.0569
N2875 X0.785 Y-0.4731 I-0.0682 J-0.0311 F25.
N2880 G01 Y-0.618 F40.
N2885 G02 X0.7705 Y-0.703 I-0.2637 J0.0013
N2890 X0.663 Y-0.7846 I-0.1186 J0.0447
N2895 G01 X0.6571 Y-0.7842 F25.
N2900 X0.6512 Y-0.7835
N2905 X0.6455 Y-0.7822
N2910 X0.6398 Y-0.7805
N2915 X0.6343 Y-0.7784
N2920 G02 X0.5974 Y-0.675 I0.0297 J0.0689 F100.
N2925 G01 X0.6434 Y-0.5862
N2930 G02 X0.7783 Y-0.5895 I0.0666 J-0.0345
N2935 X0.785 Y-0.618 I-0.0682 J-0.0311 F25.
N2940 X0.7811 Y-0.6967 I-0.4718 J-0.0161 F40.
N2945 X0.6855 Y-0.7827 I-0.1065 J0.0223
N2950 G01 X0.663 Y-0.7845
N2955 X0.6405 Y-0.785
N2960 X0.5758
N2965 G02 X0.5473 Y-0.7783 I0.0026 J0.075 F25.
N2970 X0.5066 Y-0.7318 I0.0311 J0.0682 F100.
N2975 G01 X0.0769 Y0.6883
N2980 G02 X0.1176 Y0.7783 I0.0718 J0.0217
N2985 X0.1461 Y0.785 I0.0311 J-0.0682 F25.
N2990 G01 X0.3607 F40.
N2995 G02 X0.5355 Y0.7417 I-0.0119 J-0.4227
N3000 X0.6963 Y0.6344 I-0.2732 J-0.5834
N3005 G01 X0.7241 Y0.6085
N3010 X0.7488 Y0.5831
N3015 G02 X0.7837 Y0.5116 I-0.0956 J-0.0909
N3020 G01 X0.785 Y0.4929
N3025 Y0.3004
N3030 G02 X0.7783 Y0.2719 I-0.075 J0.0026 F25.
N3035 X0.653 Y0.2544 I-0.0682 J0.0311 F100.
N3040 G01 X0.3062 Y0.6614
N3045 G02 X0.3322 Y0.7783 I0.0571 J0.0486
N3050 X0.3607 Y0.785 I0.0311 J-0.0682 F25.
N3055 G01 X0.5281 F40.
N3060 G02 X0.6756 Y0.7474 I-0.0128 J-0.358
N3065 X0.7436 Y0.7054 I-0.1141 J-0.2612
N3070 X0.785 Y0.6102 I-0.0897 J-0.0956
N3075 G01 X0.7846 Y0.6043 F25.
N3080 X0.7837 Y0.5985
N3085 X0.7823 Y0.5928
N3090 X0.7805 Y0.5872
N3095 X0.7783 Y0.5817
N3100 G02 X0.6743 Y0.5469 I-0.0682 J0.0311 F100.
N3105 G01 X0.495 Y0.6441
N3110 G02 X0.4996 Y0.7783 I0.0358 J0.0659
N3115 X0.5281 Y0.785 I0.0311 J-0.0682 F25.
N3120 G01 X0.6405 F40.
N3125 G02 X0.708 Y0.7783 I0.0088 J-0.2531
N3130 X0.7613 Y0.7402 I-0.0357 J-0.1065
N3135 X0.7826 Y0.6854 I-0.0863 J-0.0651
N3140 G01 X0.7845 Y0.663
N3145 X0.785 Y0.6405
N3150 Y0.4929
N3155 G02 X0.7783 Y0.4644 I-0.075 J0.0026 F25.
N3160 X0.7717 Y0.4528 I-0.0682 J0.0311 F100.
N3165 G01 X-0.0646 Y-0.7528
N3170 G02 X-0.0951 Y-0.7783 I-0.0616 J0.0427
N3175 X-0.1236 Y-0.785 I-0.0311 J0.0682 F25.
N3180 G01 X-0.3483 F40.
N3185 G02 X-0.5206 Y-0.7434 I0.0095 J0.4163
N3190 X-0.6989 Y-0.6185 I0.2669 J0.5708
N3195 G01 X-0.7249 Y-0.5921
N3200 X-0.7501 Y-0.5637
N3205 G02 X-0.7803 Y-0.5093 I0.1042 J0.0934
N3210 G01 X-0.7838 Y-0.4921
N3215 X-0.785 Y-0.4745
N3220 Y-0.2573
N3225 G02 X-0.7783 Y-0.2288 I0.075 J-0.0026 F25.
N3230 X-0.6514 Y-0.2131 I0.0682 J-0.0311 F100.
N3235 G01 X-0.2923 Y-0.6633
N3240 G02 X-0.3199 Y-0.7783 I-0.0586 J-0.0468
N3245 X-0.3483 Y-0.785 I-0.0311 J0.0682 F25.
N3250 G01 X-0.518 F40.
N3255 G02 X-0.6621 Y-0.747 I0.015 J0.3488
N3260 X-0.7354 Y-0.7031 I0.168 J0.3635
N3265 X-0.785 Y-0.6009 I0.0804 J0.1022
N3270 X-0.7783 Y-0.5724 I0.075 J-0.0026 F25.
N3275 X-0.6733 Y-0.5382 I0.0682 J-0.0311 F100.
N3280 G01 X-0.4839 Y-0.6447
N3285 G02 X-0.4895 Y-0.7783 I-0.0368 J-0.0654
N3290 X-0.518 Y-0.785 I-0.0311 J0.0682 F25.
N3295 G01 X-0.6405 F40.
N3300 G02 X-0.7064 Y-0.7761 I-0.0076 J0.192
N3305 X-0.7753 Y-0.7155 I0.0411 J0.1163
N3310 X-0.7786 Y-0.6864 I0.0714 J0.0228 F25.
N3315 X-0.6747 Y-0.6236 I0.0747 J-0.0063 F100.
N3320 G01 X-0.6348 Y-0.6405
N3325 G02 X-0.6343 Y-0.7784 I-0.0292 J-0.0691
N3330 X-0.663 Y-0.7845 I-0.0297 J0.0689 F25.
N3335 G01 X-0.6854 Y-0.7826 F40.
N3340 G02 X-0.7826 Y-0.6854 I0.0104 J0.1076
N3345 G01 X-0.7845 Y-0.663
N3350 X-0.785 Y-0.6405
N3355 Y-0.4745
N3360 X-0.7846 Y-0.4737 F25.
N3365 G03 X-0.7644 Y-0.4536 I-0.2886 J0.3095
N3370 X-0.7144 Y-0.3885 I-0.3088 J0.2893 F100.
N3375 X-0.703 Y-0.3488 I-0.0636 J0.0397
N3380 G01 Y0.0203
N3385 G03 X-0.7144 Y0.06 I-0.075
N3390 X-0.7644 Y0.1251 I-0.3589 J-0.2243
N3395 X-0.7846 Y0.1453 I-0.3088 J-0.2893 F25.
N3400 G01 X-0.785 Y0.1461
N3405 Y0.3607 F40.
N3410 G02 X-0.7416 Y0.5288 I0.4077 J-0.0155
N3415 X-0.6145 Y0.706 I0.5669 J-0.2726
N3420 G01 X-0.5878 Y0.7318
N3425 X-0.5589 Y0.7568
N3430 G02 X-0.4781 Y0.785 I0.0808 J-0.1018
N3435 G01 X-0.2617
N3440 G02 X-0.2332 Y0.7783 I-0.0026 J-0.075 F25.
N3445 X-0.2182 Y0.6508 I-0.0311 J-0.0682 F100.
N3450 G01 X-0.664 Y0.3041
N3455 G02 X-0.7783 Y0.3322 I-0.046 J0.0592
N3460 X-0.785 Y0.3607 I0.0682 J0.0311 F25.
N3465 G01 Y0.518 F40.
N3470 G02 X-0.749 Y0.6608 I0.3445 J-0.0109
N3475 X-0.7056 Y0.7346 I0.3641 J-0.1648
N3480 X-0.6028 Y0.785 I0.1029 J-0.0797
N3485 X-0.5743 Y0.7783 I-0.0026 J-0.075 F25.
N3490 X-0.5398 Y0.6738 I-0.0311 J-0.0682 F100.
N3495 G01 X-0.6444 Y0.4844
N3500 G02 X-0.7783 Y0.4895 I-0.0656 J0.0363
N3505 X-0.785 Y0.518 I0.0682 J0.0311 F25.
N3510 G01 Y0.6405 F40.
N3515 G02 X-0.771 Y0.7243 I0.2216 J0.0061
N3520 G01 X-0.7681 Y0.7298
N3525 G02 X-0.7443 Y0.7449 I0.0257 J-0.0142 F25.
N3530 X-0.7138 Y0.7087 I0.0019 J-0.0293 F100.
N3535 G01 X-0.7266 Y0.6564
N3540 G02 X-0.7706 Y0.6384 I-0.0285 J0.007
N3545 X-0.7845 Y0.663 I0.0155 J0.025 F25.
N3550 G01 X-0.7826 Y0.6854 F40.
N3555 G02 X-0.6854 Y0.7826 I0.1076 J-0.0104
N3560 G01 X-0.663 Y0.7845
N3565 X-0.6405 Y0.785
N3570 X-0.4781
N3575 X-0.4741 Y0.7845 Z1.1015 F25.
N3580 X-0.4702 Y0.7839 Z1.1023
N3585 X-0.4664 Y0.7834 Z1.1036
N3590 X-0.4629 Y0.7829 Z1.1055
N3595 X-0.4596 Y0.7818 Z1.108
N3600 X-0.4567 Y0.7807 Z1.111
N3605 X-0.4542 Y0.7799 Z1.1144
N3610 X-0.4522 Y0.7792 Z1.1181
N3615 X-0.4507 Y0.7787 Z1.1221
N3620 X-0.4499 Y0.7784 Z1.1263
N3625 X-0.4496 Y0.7783 Z1.1306
N3630 G00 Z1.9
N3635 X-0.3033 Y-0.1241
N3640 Z1.2762
N3645 G01 Z1.2012 F25.
N3650 G02 X0.3034 Y0.124 Z1.1697 I0.3034 J0.124
N3655 X-0.3033 Y-0.1241 Z1.1383 I-0.3034 J-0.124
N3660 X0.3034 Y0.124 Z1.1068 I0.3034 J0.124
N3665 X-0.3033 Y-0.1241 Z1.0753 I-0.3034 J-0.124
N3670 X0.3034 Y0.124 Z1.0439 I0.3034 J0.124
N3675 X0.3278 Y0. Z1.04 I-0.3034 J-0.124
N3680 X-0.3277 I-0.3278
N3685 X0.3278 Y0.0041 I0.3278
N3690 G01 Y0.
N3695 X0.3279 Y-0.016 F40.
N3700 X0.3325 Y-0.08
N3705 G02 X0.3313 Y-0.1768 I-0.165 J-0.0465
N3710 X0.2409 Y-0.3188 I-0.2754 J0.0757
N3715 X-0.0086 Y-0.4111 I-0.2438 J0.2757
N3720 X-0.4014 Y-0.104 I0.0019 J0.4072
N3725 X0.3759 Y0.1761 I0.4014 J0.1045
N3730 X0.4294 Y0.0207 I-0.603 J-0.2949
N3735 X0.4152 Y-0.212 I-0.4317 J-0.0903
N3740 X0.1526 Y-0.4739 I-0.4099 J0.1484
N3745 X-0.2778 Y-0.4257 I-0.1672 J0.4524
N3750 X-0.4243 Y0.2841 I0.2734 J0.4265
N3755 X0.3755 Y0.3467 I0.4245 J-0.2833
N3760 X0.5389 Y-0.0222 I-0.4464 J-0.4184
N3765 X0.4615 Y-0.3408 I-0.5417 J-0.0371
N3770 X0.0405 Y-0.601 I-0.4708 J0.2909
N3775 X-0.4722 Y-0.3887 I-0.0569 J0.5878
N3780 X-0.335 Y0.514 I0.4689 J0.3905
N3785 X0.3699 Y0.4902 I0.3355 J-0.5128
N3790 X0.6466 Y-0.0511 I-0.4094 J-0.5507
N3795 X0.1696 Y-0.684 I-0.6535 J-0.0037
N3800 X-0.3807 Y-0.6084 I-0.1898 J0.6598
N3805 X-0.6847 Y0.2295 I0.3723 J0.6092
N3810 X0.3208 Y0.6478 I0.6848 J-0.2284
N3815 X0.6681 Y0.3082 I-0.3421 J-0.6972
N3820 X0.7382 Y-0.2272 I-0.6868 J-0.3622
N3825 X0.2436 Y-0.7774 I-0.7484 J0.1754
N3830 G01 X0.2293 Y-0.7816
N3835 X0.2146 Y-0.7841
N3840 X0.1998 Y-0.785
N3845 X-0.1236
N3850 G02 X-0.4157 Y-0.7091 I0.0111 J0.6423
N3855 X-0.6917 Y-0.4622 I0.3552 J0.675
N3860 X-0.7811 Y-0.2903 I0.6028 J0.4226
N3865 G01 X-0.7839 Y-0.2738
N3870 X-0.785 Y-0.2573
N3875 Y0.1461
N3880 G02 X-0.7243 Y0.3922 I0.6015 J-0.0177
N3885 X-0.5223 Y0.6493 I0.6725 J-0.3207
N3890 X-0.3092 Y0.7761 I0.5087 J-0.6124
N3895 G01 X-0.2937 Y0.781
N3900 X-0.2778 Y0.784
N3905 X-0.2617 Y0.785
N3910 X0.1461
N3915 G02 X0.3971 Y0.7235 I-0.0173 J-0.6136
N3920 X0.6149 Y0.5701 I-0.3297 J-0.6993
N3925 X0.7707 Y0.3598 I-0.598 J-0.6061
N3930 X0.785 Y0.3004 I-0.1173 J-0.0596
N3935 G01 Y-0.2809
N3940 G02 X0.7322 Y-0.4909 I-0.5122 J0.0171
N3945 X0.5914 Y-0.6892 I-0.6344 J0.3013
N3950 G01 X0.5635 Y-0.7161
N3955 X0.5337 Y-0.742
N3960 X0.5144 Y-0.7572
N3965 G02 X0.4341 Y-0.785 I-0.0803 J0.1021
N3970 G01 X0.1998
N3975 G02 X0.1713 Y-0.7783 I0.0026 J0.075 F25.
N3980 X0.1542 Y-0.6526 I0.0311 J0.0682 F100.
N3985 G01 X0.6618 Y-0.2261
N3990 G02 X0.7783 Y-0.2524 I0.0482 J-0.0574
N3995 X0.785 Y-0.2809 I-0.0682 J-0.0311 F25.
N4000 G01 Y-0.4731 F40.
N4005 G02 X0.7428 Y-0.632 I-0.3851 J0.0171
N4010 X0.6738 Y-0.7405 I-0.4556 J0.214
N4015 X0.5758 Y-0.785 I-0.0981 J0.0857
N4020 G01 X0.4341
N4025 G02 X0.4056 Y-0.7783 I0.0026 J0.075 F25.
N4030 X0.3879 Y-0.6531 I0.0311 J0.0682 F100.
N4035 G01 X0.6612 Y-0.4187
N4040 G02 X0.7783 Y-0.4446 I0.0488 J-0.0569
N4045 X0.785 Y-0.4731 I-0.0682 J-0.0311 F25.
N4050 G01 Y-0.618 F40.
N4055 G02 X0.7705 Y-0.703 I-0.2637 J0.0013
N4060 X0.663 Y-0.7846 I-0.1186 J0.0447
N4065 G01 X0.6571 Y-0.7842 F25.
N4070 X0.6512 Y-0.7835
N4075 X0.6455 Y-0.7822
N4080 X0.6398 Y-0.7805
N4085 X0.6343 Y-0.7784
N4090 G02 X0.5974 Y-0.675 I0.0297 J0.0689 F100.
N4095 G01 X0.6434 Y-0.5862
N4100 G02 X0.7783 Y-0.5895 I0.0666 J-0.0345
N4105 X0.785 Y-0.618 I-0.0682 J-0.0311 F25.
N4110 X0.7811 Y-0.6967 I-0.4718 J-0.0161 F40.
N4115 X0.6855 Y-0.7827 I-0.1065 J0.0223
N4120 G01 X0.663 Y-0.7845
N4125 X0.6405 Y-0.785
N4130 X0.5758
N4135 G02 X0.5473 Y-0.7783 I0.0026 J0.075 F25.
N4140 X0.5066 Y-0.7318 I0.0311 J0.0682 F100.
N4145 G01 X0.0769 Y0.6883
N4150 G02 X0.1176 Y0.7783 I0.0718 J0.0217
N4155 X0.1461 Y0.785 I0.0311 J-0.0682 F25.
N4160 G01 X0.3607 F40.
N4165 G02 X0.5355 Y0.7417 I-0.0119 J-0.4227
N4170 X0.6963 Y0.6344 I-0.2732 J-0.5834
N4175 G01 X0.7241 Y0.6085
N4180 X0.7488 Y0.5831
N4185 G02 X0.7837 Y0.5116 I-0.0956 J-0.0909
N4190 G01 X0.785 Y0.4929
N4195 Y0.3004
N4200 G02 X0.7783 Y0.2719 I-0.075 J0.0026 F25.
N4205 X0.653 Y0.2544 I-0.0682 J0.0311 F100.
N4210 G01 X0.3062 Y0.6614
N4215 G02 X0.3322 Y0.7783 I0.0571 J0.0486
N4220 X0.3607 Y0.785 I0.0311 J-0.0682 F25.
N4225 G01 X0.5281 F40.
N4230 G02 X0.6756 Y0.7474 I-0.0128 J-0.358
N4235 X0.7436 Y0.7054 I-0.1141 J-0.2612
N4240 X0.785 Y0.6102 I-0.0897 J-0.0956
N4245 G01 X0.7846 Y0.6043 F25.
N4250 X0.7837 Y0.5985
N4255 X0.7823 Y0.5928
N4260 X0.7805 Y0.5872
N4265 X0.7783 Y0.5817
N4270 G02 X0.6743 Y0.5469 I-0.0682 J0.0311 F100.
N4275 G01 X0.495 Y0.6441
N4280 G02 X0.4996 Y0.7783 I0.0358 J0.0659
N4285 X0.5281 Y0.785 I0.0311 J-0.0682 F25.
N4290 G01 X0.6405 F40.
N4295 G02 X0.708 Y0.7783 I0.0088 J-0.2531
N4300 X0.7613 Y0.7402 I-0.0357 J-0.1065
N4305 X0.7826 Y0.6854 I-0.0863 J-0.0651
N4310 G01 X0.7845 Y0.663
N4315 X0.785 Y0.6405
N4320 Y0.4929
N4325 G02 X0.7783 Y0.4644 I-0.075 J0.0026 F25.
N4330 X0.7717 Y0.4528 I-0.0682 J0.0311 F100.
N4335 G01 X-0.0646 Y-0.7528
N4340 G02 X-0.0951 Y-0.7783 I-0.0616 J0.0427
N4345 X-0.1236 Y-0.785 I-0.0311 J0.0682 F25.
N4350 G01 X-0.3483 F40.
N4355 G02 X-0.5206 Y-0.7434 I0.0095 J0.4163
N4360 X-0.6989 Y-0.6185 I0.2669 J0.5708
N4365 G01 X-0.7249 Y-0.5921
N4370 X-0.7501 Y-0.5637
N4375 G02 X-0.7803 Y-0.5093 I0.1042 J0.0934
N4380 G01 X-0.7838 Y-0.4921
N4385 X-0.785 Y-0.4745
N4390 Y-0.2573
N4395 G02 X-0.7783 Y-0.2288 I0.075 J-0.0026 F25.
N4400 X-0.6514 Y-0.2131 I0.0682 J-0.0311 F100.
N4405 G01 X-0.2923 Y-0.6633
N4410 G02 X-0.3199 Y-0.7783 I-0.0586 J-0.0468
N4415 X-0.3483 Y-0.785 I-0.0311 J0.0682 F25.
N4420 G01 X-0.518 F40.
N4425 G02 X-0.6621 Y-0.747 I0.015 J0.3488
N4430 X-0.7354 Y-0.7031 I0.168 J0.3635
N4435 X-0.785 Y-0.6009 I0.0804 J0.1022
N4440 X-0.7783 Y-0.5724 I0.075 J-0.0026 F25.
N4445 X-0.6733 Y-0.5382 I0.0682 J-0.0311 F100.
N4450 G01 X-0.4839 Y-0.6447
N4455 G02 X-0.4895 Y-0.7783 I-0.0368 J-0.0654
N4460 X-0.518 Y-0.785 I-0.0311 J0.0682 F25.
N4465 G01 X-0.6405 F40.
N4470 G02 X-0.7064 Y-0.7761 I-0.0076 J0.192
N4475 X-0.7753 Y-0.7155 I0.0411 J0.1163
N4480 X-0.7786 Y-0.6864 I0.0714 J0.0228 F25.
N4485 X-0.6747 Y-0.6236 I0.0747 J-0.0063 F100.
N4490 G01 X-0.6348 Y-0.6405
N4495 G02 X-0.6343 Y-0.7784 I-0.0292 J-0.0691
N4500 X-0.663 Y-0.7845 I-0.0297 J0.0689 F25.
N4505 G01 X-0.6854 Y-0.7826 F40.
N4510 G02 X-0.7826 Y-0.6854 I0.0104 J0.1076
N4515 G01 X-0.7845 Y-0.663
N4520 X-0.785 Y-0.6405
N4525 Y-0.4745
N4530 X-0.7846 Y-0.4737 F25.
N4535 G03 X-0.7644 Y-0.4536 I-0.2886 J0.3095
N4540 X-0.7144 Y-0.3885 I-0.3088 J0.2893 F100.
N4545 X-0.703 Y-0.3488 I-0.0636 J0.0397
N4550 G01 Y0.0203
N4555 G03 X-0.7144 Y0.06 I-0.075
N4560 X-0.7644 Y0.1251 I-0.3589 J-0.2243
N4565 X-0.7846 Y0.1453 I-0.3088 J-0.2893 F25.
N4570 G01 X-0.785 Y0.1461
N4575 Y0.3607 F40.
N4580 G02 X-0.7416 Y0.5288 I0.4077 J-0.0155
N4585 X-0.6145 Y0.706 I0.5669 J-0.2726
N4590 G01 X-0.5878 Y0.7318
N4595 X-0.5589 Y0.7568
N4600 G02 X-0.4781 Y0.785 I0.0808 J-0.1018
N4605 G01 X-0.2617
N4610 G02 X-0.2332 Y0.7783 I-0.0026 J-0.075 F25.
N4615 X-0.2182 Y0.6508 I-0.0311 J-0.0682 F100.
N4620 G01 X-0.664 Y0.3041
N4625 G02 X-0.7783 Y0.3322 I-0.046 J0.0592
N4630 X-0.785 Y0.3607 I0.0682 J0.0311 F25.
N4635 G01 Y0.518 F40.
N4640 G02 X-0.749 Y0.6608 I0.3445 J-0.0109
N4645 X-0.7056 Y0.7346 I0.3641 J-0.1648
N4650 X-0.6028 Y0.785 I0.1029 J-0.0797
N4655 X-0.5743 Y0.7783 I-0.0026 J-0.075 F25.
N4660 X-0.5398 Y0.6738 I-0.0311 J-0.0682 F100.
N4665 G01 X-0.6444 Y0.4844
N4670 G02 X-0.7783 Y0.4895 I-0.0656 J0.0363
N4675 X-0.785 Y0.518 I0.0682 J0.0311 F25.
N4680 G01 Y0.6405 F40.
N4685 G02 X-0.771 Y0.7243 I0.2216 J0.0061
N4690 G01 X-0.7681 Y0.7298
N4695 G02 X-0.7443 Y0.7449 I0.0257 J-0.0142 F25.
N4700 X-0.7138 Y0.7087 I0.0019 J-0.0293 F100.
N4705 G01 X-0.7266 Y0.6564
N4710 G02 X-0.7706 Y0.6384 I-0.0285 J0.007
N4715 X-0.7845 Y0.663 I0.0155 J0.025 F25.
N4720 G01 X-0.7826 Y0.6854 F40.
N4725 G02 X-0.6854 Y0.7826 I0.1076 J-0.0104
N4730 G01 X-0.663 Y0.7845
N4735 X-0.6405 Y0.785
N4740 X-0.4781
N4745 G02 X-0.4496 Y0.7783 I-0.0026 J-0.075 F25.
N4750 G01 X-0.4436 Y0.7756 Z1.0403
N4755 X-0.4377 Y0.7729 Z1.0411
N4760 X-0.4319 Y0.7702 Z1.0426
N4765 X-0.4262 Y0.7677 Z1.0445
N4770 X-0.4207 Y0.7651 Z1.047
N4775 X-0.4154 Y0.7627 Z1.05
N4780 X-0.4104 Y0.7605 Z1.0536
N4785 X-0.4057 Y0.7583 Z1.0575
N4790 X-0.4013 Y0.7563 Z1.062
N4795 X-0.3973 Y0.7545 Z1.0668
N4800 X-0.3937 Y0.7528 Z1.072
N4805 X-0.3905 Y0.7514 Z1.0775
N4810 X-0.3877 Y0.7501 Z1.0833
N4815 X-0.3854 Y0.7491 Z1.0893
N4820 X-0.3837 Y0.7483 Z1.0956
N4825 X-0.3824 Y0.7477 Z1.102
N4830 X-0.3816 Y0.7473 Z1.1085
N4835 X-0.3813 Y0.7472 Z1.115
N4840 G00 Z2.3

N4850 M09
N4855 G28 G91 Z0.
N4860 G49
N4865 G28 X0. Y0.
N4870 M30
%

mycnc
Posts: 140
Joined: Thu May 10, 2018 2:42 pm

Re: ET-6 post processor

Post by mycnc » Wed Oct 03, 2018 1:49 pm

It's a challenge.

Both codes look compatible, but I see some issues.

1) For a default configuration, I see an issue with feedrate for imperial units.
2) Tool change codes with tool number 61, 66 are used. Why? Do you have ATC?
The software setting up needed to handle correctly this tool numbers.
3) Using G43 code for a simple machine without ATC looks strange for me.

I will be back soon with the feed rate test results.

RMC
Posts: 24
Joined: Sun Sep 30, 2018 6:28 am

Re: ET-6 post processor

Post by RMC » Wed Oct 03, 2018 8:43 pm

Thank you
And its tool number 66 in my cam tool library so that must be why. and no i do not have an ATC i wish tho :D

mycnc
Posts: 140
Joined: Thu May 10, 2018 2:42 pm

Re: ET-6 post processor

Post by mycnc » Thu Oct 04, 2018 5:02 am

What postprocessors are included in the Fusion 360?
Could you generate g-code files for the same model, but different postprocessors?
It would be helpful for tests and easier to compare.

RMC
Posts: 24
Joined: Sun Sep 30, 2018 6:28 am

Re: ET-6 post processor

Post by RMC » Thu Oct 04, 2018 8:47 pm

https://cam.autodesk.com/hsmposts?
well there is about like 100 haha
i could do a few specific ones ?

mycnc
Posts: 140
Joined: Thu May 10, 2018 2:42 pm

Re: ET-6 post processor

Post by mycnc » Thu Oct 04, 2018 10:31 pm

I've just got the same link from other forum, will try

RMC
Posts: 24
Joined: Sun Sep 30, 2018 6:28 am

Re: ET-6 post processor

Post by RMC » Sun Oct 07, 2018 2:53 am

ok so the ones you want me to try out are
HAAS
FANUC
LINUX
MACH3?

mycnc
Posts: 140
Joined: Thu May 10, 2018 2:42 pm

Re: ET-6 post processor

Post by mycnc » Mon Oct 08, 2018 4:15 am

We found a bug with feed rate given in imperial units. It should be fixed in the last version.
Both g-codes are compatible and work well now.
However, the 2nd code looks too complicated for simple no ATC machine
1) No need to use G43 (Tool Length offset) code for no ATC spindle.
2) I'm not sure if switching to the G57 coordinate system is needed.

mycnc-update-001-17.png
mycnc-update-001-16.png
But anyway it's interesting to test Haas, Mach, NS274(LinuxCNC) posts as well.

Post Reply