ET-6 post processor
Re: ET-6 post processor
Will do. My friend should be able to post then later this afternoon.
Also anyway I could get the 3 axis mill screen?
The one I downloaded has like half the buttons missing.
Also anyway I could get the 3 axis mill screen?
The one I downloaded has like half the buttons missing.
Re: ET-6 post processor
Have you managed to update the software?
It's supposed the last version of binary file myCNC has included all the new icons.
The profile is still not finished, we are working on some new icons for the profile.
We will publish the icon files later as well for those who like to make custom changes.
It's supposed the last version of binary file myCNC has included all the new icons.
The profile is still not finished, we are working on some new icons for the profile.
We will publish the icon files later as well for those who like to make custom changes.
Re: ET-6 post processor
here are the files
0001-fanuc
0002- HAAS UMC-750
0003- Tormach pathpilot
0004-mach 3 mill
0005- linux cnc
0006- grbl
i have made a google drive folder so it would be easier
https://drive.google.com/drive/folders/ ... sp=sharing
i hope this helps
0001-fanuc
0002- HAAS UMC-750
0003- Tormach pathpilot
0004-mach 3 mill
0005- linux cnc
0006- grbl
i have made a google drive folder so it would be easier
https://drive.google.com/drive/folders/ ... sp=sharing
i hope this helps
Re: ET-6 post processor
and is there anyway for me to copy my settings over to the profile ? would copying pasting work ?
Re: ET-6 post processor
All machine settings are in cnc-variables.xml
If you like to update the screen, but keep your machine settings, you need to update all XML files except cnc-variables.xml.
Macros are in macros folder, PLC procedures are in plc.
It's up to you to update it or not.
To use your settings with a new profile you need top copy your old cnc-variables.xml to a new profile folder.
If you like to update the screen, but keep your machine settings, you need to update all XML files except cnc-variables.xml.
Macros are in macros folder, PLC procedures are in plc.
It's up to you to update it or not.
To use your settings with a new profile you need top copy your old cnc-variables.xml to a new profile folder.
Re: ET-6 post processor
I just copied the settings by hand when i copied the cnc variables file it mess up the icons pretty bad.
On other notes
The arrow that tells me the position of machine in the gcode visualizer seems to break if i upload a 200 line plus program on the smaller ones it seem pretty fine.
Is there a automatic disable set?
other then that most of friends like the new one.
thank you very much for your help
On other notes
The arrow that tells me the position of machine in the gcode visualizer seems to break if i upload a 200 line plus program on the smaller ones it seem pretty fine.
Is there a automatic disable set?
other then that most of friends like the new one.
thank you very much for your help
Re: ET-6 post processor
I'm not sure what you are talking about.
See a screenshot below. G-code program is over 2.2M lines and the arrow is ok.
Re: ET-6 post processor
my issue is the arrow wont move with the gcode it just sits at where i put 0,0,0 and thats it
Re: ET-6 post processor
oh wow im dumb sorry for that
as for the post processor which one is the best suited for the et-6?
as for the post processor which one is the best suited for the et-6?