Cutcharts for Hypertherm HPR 130 XD

MefiuuC21
Posts: 17
Joined: Thu Sep 17, 2020 7:25 pm

Re: Cutcharts for Hypertherm HPR 130 XD

Post by MefiuuC21 »

Hi
I edited this file and it works.
Thanks for your help.
I have got only problem with wifi. Sometimes it connects and sometimes not and I don't know what it depends on?

ivan
Posts: 349
Joined: Tue Apr 16, 2019 5:30 pm
Location: Ottawa, Canada

Re: Cutcharts for Hypertherm HPR 130 XD

Post by ivan »

Hi there,

It sounds like your WiFi router and the Raspberry Pi 4 may have some sort of a compatibility issue. Unfortunately, we cannot help much with that, since the WiFi implementation on the Pi's is outside our control - I'd recommend asking on the Raspberry Pi support forum: https://www.raspberrypi.org/forums/

MefiuuC21
Posts: 17
Joined: Thu Sep 17, 2020 7:25 pm

Re: Cutcharts for Hypertherm HPR 130 XD

Post by MefiuuC21 »

Hello,
I have problem with cutcharts for HPR 400. It does not work for normal mild steel 30A cut.

ivan
Posts: 349
Joined: Tue Apr 16, 2019 5:30 pm
Location: Ottawa, Canada

Re: Cutcharts for Hypertherm HPR 130 XD

Post by ivan »

Hi there, thank you for the bug report. We'll be looking into that - I will let you know when an updated version of the HPR400XD cutcharts is out.

ivan
Posts: 349
Joined: Tue Apr 16, 2019 5:30 pm
Location: Ottawa, Canada

Re: Cutcharts for Hypertherm HPR 130 XD

Post by ivan »

Hi there,

We have added an updated version of the HPR400XD cutcharts which should fix the 30A Mild Steel normal cut issue. You can download the new version from our website (https://www.pv-automation.com/en/download) and switch out the old file for the new one in your respective folder (on Ubuntu MATE this will be /opt/myCNC/Cutcharts). Let me know if that works for you.

Post Reply