Fadal 4020 upgrade

euroflo
Posts: 23
Joined: Wed Dec 19, 2018 8:23 pm

Re: Fadal 4020 upgrade

Post by euroflo » Tue Feb 05, 2019 8:42 pm

Hey mate
Ok the code is in and the 2 box,s ticked...

on manual input of the speed the gear changed is working great.... tried it with a program and is not changing....

do i need to add something to the M03 code...??

thanks
Justin

mycnc
Posts: 492
Joined: Thu May 10, 2018 2:42 pm

Re: Fadal 4020 upgrade

Post by mycnc » Wed Feb 06, 2019 12:41 am

I suppose the speed is not perfect now since the ratios "1" and "1/2" are very rough.
You need to check set and real spindle speed and find better ratios.

Then the fixed content from SPN.plc need to copy to M02.plc as well.

Post Reply