Let me explain what happens.
The program start right and doing the interpolation with G02, but when we pause and restart the program after, we get error on the screen and the software frozen, even the hardkeys (M5 mainly) connecteds do not respond, we have to hit E-Stop button for stop the spindle and the program, but the software still frozen. Some time I have noticed when I restart the single board computer from TTY1 and If I do not hit the E-Stop button before for stop the spindle and the program, the program is still running even while the SBC is restarting, like the program is loaded in a kind of buffer.
Please help! Photos attached and G-code.
Code: Select all
G54 G17 G80 G21 M3 S3600 G0 A0 G0 Z0 G0G90 X0.0Y0.0 G0Z0.0 M98 P100 L180 G90G0Z0.0 M5 G80 M30 (SUBRUTINE) O100 G91G01Z-0.3F500 G01X-11.0Y0.0F1200 G02X22.0Y0.0R11 G02X-22.0Y0.0R11 G1X11.0 M99